The New Eliminator III with X96 reticle technology empowers the rifleman with even more accuracy and range.
The 4X-16X-50mm Eliminator III Laserscope features an integrated 800 yard rangefinder coupled with a very simple yet very accurate method of customizing the trajectory compensation capability to virtually any cartridge. The Eliminator III Laserscope has 39 ballistic curves on board to select from and Burris provides a listing of nearly 600 factory loaded cartridges and the two digit ballistic curve number associated with each. A few clicks in the set up mode is all it takes to enter or change the ballistic curve to perfectly match your specific cartridge’s performance.
• 1200+ Yards • Accurate at ANY Magnification • New Ergonomic Activation Buttons • Enhanced Extreme Range Ballistic Programming • Sleek, New Design • Parallax Adjustment 50 yd. to Infinity
Simple Operation & Programming
At the press of a button, you enter the Drop Number and Ballistic Coefficient appropriate for your ammunition. This data is available in the Cartridge List (1,500+ Specific Loads) provided by Burris or from just about any ballistics software program.
To range, place the cross hair on your target and press either button on the objective bell. In less than a second, the range to your target and a lighted dot will appear indicating the correct aiming point for your specific ammunition for the distance to the target.
Windage Compensation Innovation
The X96 reticle provides a convenient and accurate METHOD to more easily compensate for wind. However, complete wind compensation is NOT fully automated within the scope. It still requires some thinking on the part of the shooter. In addition to distance, the digital display will show a 10 MPH Wind Value for your specific cartridge at the indicated range to your target. This is a “Dot Value” that corresponds to the dots on each side of the reticle’s vertical post. These dots let the shooter precisely hold into the wind. The shooter still needs to estimate the cross-wind and convert the 10MPH Wind Value displayed to the appropriate value for the estimated actual MPH cross-wind value. The shooter then holds into the wind using the appropriate “Dot Value” as shown in the examples below.
|Laser Range* (yards reflective)||1200+|
|Laser Range* (yards deer)||750+|
|Laser Accuracy||+/- 1 yard|
|Battery Life||5000 cycles|
|Operating Temperature||-15° – +140°F|
|Field of View||25-7|
|(Low-High feet @ 100 yards)|
|Adjustable Parallax (yards)||50 – infinity|
|Exit Pupil (mm) Low – High||12.5-3.1|
|Click Value (Inch @ 100 yards)||1/4 MOA|
|Maximum Adjustment||40 MOA|
|Weight with mount & battery||26 oz|
|Optimum Eye Relief (Inch)||3.5 – 4.0|
|Objective End Dia (mm)||65.5|
|Clear Objective Dia (mm)||50|
|Ocular End Dia (mm)||39|
|Overall Length (Inch)||15.75|
|Mounting Rail Length (Inch)||8.5|
|Torque Spec. for Mounting Bolts||40-80 in.-lb.|